Китайский производитель снаряжения для плавания и дайвинга для брендов, оптовики, и OEM-проекты с тех пор 1993.

Snorkeling fins manufacturer · OEM snorkel fin factory since 1993

Custom Snorkeling Fins Manufacturer Behind the F-6866 Full-Foot Blade

Vanguard manufactures short-blade snorkeling fins for resorts, dive shops, e-commerce sellers, and rental fleets. Co-injection molded blades, LSR silicone foot pockets, and full size grading from EU 28 to EU 47, все под частной маркой по вашей спецификации от 300 пары каждого цвета.

ИСО 9001:2015BSCICE3-5 Year Lifespan
Флагман · Model F-6866

F-6866 Full-Foot Fin at a Glance

Blade
Co-injection PP+TPE
Карман для ног
ЛСР жидкий силикон
Size range
EU 28 to EU 47
Product life
3 к 5 годы
Variants
Full-foot / open-heel
OEM минимальный заказ
300 пары / цвет
30+
Лет производства плавания & снаряжение для дайвинга с тех пор 1993
27,824м²
Фабрика Гуанчжоу с 4 специализированные производственные линии
65
Injection molding machines including co-injection units
48час
Отправка плавников на складе, образцы из 1 пара
F-6866 full-foot snorkeling fins with co-injection molded blade and LSR foot pocket
F-6866full-foot · adult snorkeling
Snorkeling fin blade design detail showing thrust channels from the Vanguard factory
Snorkeling fin blade and foot pocket assembly detail

The F-6866 Full-Foot Fin, Built for Warm-Water Volume

The F-6866 is our highest-volume snorkeling fin platform. A co-injection molded blade bonds a stiff PP structural rib to a softer TPE outer skin in a single shot, eliminating the delamination failure that plagues two-piece glued blades. Paired with an LSR silicone foot pocket, it delivers 3 к 5 years of service in resort and rental conditions.

01

Co-Injection Molded Blade

One shot, two materials. The rigid PP rib carries the load through the kick stroke while the TPE skin flexes at the tip to channel water rearward. No adhesive layer to separate after 200 rental cycles. This is the construction difference your QC team will measure against cheaper glued-blade competitors.

02

LSR Silicone Foot Pocket

The foot pocket is molded from liquid silicone rubber (ЛСР): soft against bare skin, заперт на пятке, with no pressure points during 45-minute snorkel sessions. Unlike TPR pockets that harden after UV exposure, LSR retains its elasticity season after season in tropical conditions.

03

Full Size Grading on One Platform

EU 28 through EU 47 on a single blade tooling set. Junior sizes share the same blade profile scaled down, so your resort program stocks one visual identity across kids and adults. Fewer molds, faster reorders, consistent branding on the rental rack.

04

Open-Heel Variant Available

The same blade and pocket platform also ships as an open-heel adjustable-strap fin (F-6865) for buyers who need one-size-fits-most simplicity or bootie compatibility. Two SKUs, one tooling investment, double the addressable market from a single program.

The F-6866 full-foot and F-6865 adjustable-strap share the same blade mold and LSR foot pocket tooling. Programs that stock both variants reorder from the same production schedule and consolidate shipping.

Four Snorkeling Fin Programs, One Factory Floor

Adjustable-strap for rental simplicity, compact short-blade for travel retail, full-foot for warm-water resorts, and junior sizing for family programs. All four share the same QC standard, та же платформа для ног ЛСР с карманом для ног, и тот же минимальный заказ на 300 пар каждого цвета..

Compact short-blade snorkeling fins for travel, model F-6871
Compact travel

F-6871 Compact Short-Blade Fins

A shortened blade profile that fits carry-on luggage and resort rental bins. Optimized for surface swimming and pool training where a long blade creates drag and ankle strain. The top seller for airline holiday packages and hotel gift shops.

Short bladeTravel sizeминимальный заказ 300 пары/цвет
Quote compact fins
Full foot pocket snorkeling fins for warm water, model F-6851
Full foot

F-6851 Full-Foot Comfort Fins

A barefoot-fit full-foot pocket with a wider toe box for guests who refuse rental shoes. Lightweight enough for children and seniors, stiff enough for efficient surface swimming. The default choice for tropical resort operators stocking 200-plus pairs.

Full footBarefoot fitЛегкий вес
Quote full-foot fins
Kids short snorkeling fins OEM, model F-6881
Юниор / kids

F-6881 Kids Short Snorkeling Fins

Scaled blade geometry and a softer LSR pocket sized EU 28 to EU 35. Reduced blade area matches a child’s ankle strength so they swim longer without fatigue. Pairs with our F-6868 juniors model for a full youth size run from age 5 к 14.

EU 28-35Soft flexВозраст 5-14
Quote kids fins

Fin engineering

Blade Design, Foot Pocket Material, and Fit: The Three Specs That Decide Returns

Snorkeling fin buyers compare three things before they place a 500-pair order: how the blade moves water, what touches the customer’s skin, and whether the sizing runs true. Here is how our engineering answers each one.

01

Blade geometry controls thrust and fatigue

A snorkeling blade that is too stiff overloads the ankle within 10 минуты; one that is too soft produces no forward drive. We tune blade length, rib thickness, and tip flex so the power stroke loads water through the central channel and releases it cleanly at the tip. The result is a relaxed flutter kick that covers distance without calf burn, which is exactly what a 40-minute reef tour demands.

02

LSR silicone vs. TPE vs. rubber foot pockets

ЛСР (liquid silicone rubber) is the premium option: hypoallergenic, UV-stable, and soft at 40-50 Shore A. TPE pockets cost less but harden after one season of tropical sun. Natural rubber grips well but triggers latex sensitivity in roughly 8% of the population. For a resort that rents to 2,000 guests a month, LSR eliminates the complaint category entirely.

03

Adjustable strap vs. full-foot: stock the right mix

Full-foot fins (F-6866, F-6851) fit bare feet precisely and transfer power efficiently, ideal for warm-water resorts where guests wear no booties. Adjustable-strap fins (F-6865, F-6857) accept booties and cover a size range with one buckle setting, the right call for cooler water, scuba crossover, and rental operations that cannot size-fit every guest. Most programs stock 70% full-foot and 30% adjustable.

04

Size grading that runs true across reorders

Our CNC-trimmed molds hold dimensional tolerance within 0.5mm across the EU 28 to EU 47 range. Because the same tooling set produces every reorder, your size 42 fits identically in year one and year three. This consistency is why resort chains reorder from us rather than re-qualifying a new supplier each season.

Snorkeling fin blade design and thrust channel detail from Vanguard factory

Adjustable strap vs. full-foot comparison

ФакторAdjustable strap (F-6865)Full-foot (F-6866)
Fit methodBuckle strap, covers 3 sizes per SKUPrecise barefoot fit, one size per SKU
Bootie useAccepts 3mm to 5mm bootiesBarefoot or thin neoprene socks only
Power transferGood, slight heel lift under hard kickDirect, no heel movement
Rental simplicityFewer SKUs, faster guest fittingMore sizes but better comfort rating
Water tempCool to warm (18C and up with booties)Warm water (24C and up)
Лучший каналDive centers, cooler-water tours, scuba crossoverTropical resorts, holiday packages, family retail

Not sure which mix fits your operation? Спросите наших инженеров за рекомендацию с вашей цитатой. Most programs stock both.

Custom Snorkeling Fins From 300 Пар каждого цвета

От 300 пары каждого цвета, мы превратим вашу спецификацию в ласты, готовые к розничной продаже. Blade color, цвет кармана для ног, logo placement, size grading, и упаковка — все это происходит внутри нашего 27,824 м² Объект в Гуанчжоу, под управлением команды из 123 человек с 15 посвященный Р&Д-инженеры.

Custom Blade Color and Graphics

Pantone color matching for blade and foot pocket, logo printing or embossing, and custom blade graphics that make your fins recognizable on a rental rack or in a listing image.

Упаковка под собственной торговой маркой

Сетчатые сумки для плавников, печатные розничные коробки, и картонные коробки, соответствующие требованиям FBA, с маркировкой, позволяющей отслеживать партию.. Packed the way your channel requires, from resort shelf display to Amazon FNSKU compliance.

Size Grading and Fit Tuning

Full-foot and open-heel pockets graded EU 28 to EU 47 on our own tooling. We can adjust pocket volume for your target market, wider toe boxes for North American guests, narrower heels for European fit preferences.

Контролируемый контроль качества партии

Каждая партия проверяется в соответствии с нашим ISO 9001:2015 система, с предотгрузочной проверкой SGS, Интертек, или назначенное вами третье лицо по запросу. CNC-trimmed molds hold 0.5mm tolerance across the size run.

Коммерческие условия с первого взгляда

минимальный заказ
300 пары каждого цвета для нестандартных плавников. Товары на складе из 1 пара, не в последнюю очередь.
Образцы
Образцы акций 2-7 дни. Custom samples with your colors and logo 7-15 дни.
Производство
First orders around 30 дни; reorders roughly 25 дни с формами и рецептами красок в папке.
Артикул на складе
Отправка в течение 48 часов с нашего склада в Гуанчжоу.
Оплата
30% депозит при подтверждении заказа, 70% остаток перед отправкой. Плата за образец зачисляется в счет вашего первого производственного заказа.
Согласие
ИСО 9001:2015, BSCI, CE documentation included. SGS and Intertek reports on request.

Разработка под защитой NDA

Обмен нестандартных форм и изображений лезвий осуществляется только по подписанному NDA., хранится отдельно, и никогда не передается и не перепродается другому покупателю.. Ваша частная торговая марка останется вашей. Соедините плавники с маски и трубки from the same factory for a consolidated snorkeling program.

What Snorkeling Fin Buyers Ask Us First

Еще есть вопросы?

Отправьте свои целевые модели, количества, and size breakdown. Наша команда экспорта отвечает с ценами, минимальный заказ, и срок выполнения в течение одного рабочего дня.

What is the minimum order quantity for custom snorkeling fins?
Custom snorkeling fins start at 300 пары каждого цвета, covering your blade color, цвет кармана для ног, logo placement, и упаковка. Готовые к отправке плавники не имеют минимальной стоимости и могут быть заказаны в 1 пара, which lets a resort shop or e-commerce seller validate a SKU before committing to a full production run.
Сколько времени занимают образцы, и сколько они стоят?
Образцы товара доставляются в 2 к 7 дни. Custom samples with your Pantone colors, logo printing, and size spec take 7 к 15 days because our in-house prototyping line runs CNC-trimmed molds on demand. Плата за образец зачисляется в счет вашего первого производственного заказа., и мы поддерживаем предотгрузочную проверку SGS, Интертек, или назначенное вами третье лицо.
What blade materials do you use for snorkeling fins?
Our snorkeling fin blades are co-injection molded from PP+TPE polymer, which balances flex for efficient kicking with enough rigidity to transfer power through the thrust channel. The co-injection process bonds a stiff structural rib to a softer outer skin in one shot, eliminating the delamination failure common in two-piece glued blades. Foot pockets are molded from LSR liquid silicone rubber for skin-contact comfort.
Which certifications do your snorkeling fins carry for import?
Ласты производятся под нашим стандартом ISO. 9001:2015 quality system with BSCI social compliance audits, and products carry CE documentation for EU market entry. The LSR foot pocket material is skin-contact safe. Additional SGS or Intertek test reports can be arranged with batch-traceable references for retail onboarding in the US, EU, and Australia.
Какое время выполнения мне следует планировать для первого заказа и повторных заказов??
First production orders complete in about 30 дней в зависимости от количества и глубины персонализации. Reorders finish in roughly 25 days because molds, color recipes, and size grading are already on file. Товарные позиции на складе покидают наш склад в Гуанчжоу в течение 48 часы. Стандартные условия 30% депозит при подтверждении и 70% остаток перед отправкой.
Can you apply our logo and match custom colors?
Да. Private label covers logo printing or embossing on the blade and foot pocket, Pantone color matching for both blade and pocket, custom blade graphics, и готовая к розничной продаже упаковка, такая как сетчатые пакеты с плавниками., печатные коробки, или коробки, готовые к FBA. Все работает на нашем заводе в Гуанчжоу в соответствии с подписанным соглашением о неразглашении., и ваши формы и произведения искусства никогда не будут переданы другому покупателю.

Get a Snorkeling Fin Quote Within 24 Часы

Расскажите нам свои целевые модели, количества, and size breakdown. Наша экспортная команда отвечает в течение одного рабочего дня и сообщает заводские цены., минимальный заказ, color options, и время выполнения. Плата за образец зачисляется в счет вашего первого производственного заказа..

vanguardswimming@hotmail.com  ·  +86-20-62323009

Вернуться наверх
Нужно быстрое предложение? Пообщайтесь с нашей командой экспорта в WhatsApp..