Fabricante de equipamentos de natação e mergulho na China para marcas, atacadistas, e projetos OEM desde 1993.

Snorkeling fins manufacturer · OEM snorkel fin factory since 1993

Custom Snorkeling Fins Manufacturer Behind the F-6866 Full-Foot Blade

Vanguard manufactures short-blade snorkeling fins for resorts, dive shops, vendedores de comércio eletrônico, and rental fleets. Co-injection molded blades, LSR silicone foot pockets, and full size grading from EU 28 to EU 47, todos rotulados de forma privada de acordo com suas especificações de 300 pares por cor.

ISO 9001:2015BSCICE3-5 Year Lifespan
Carro-chefe · Model F-6866

F-6866 Full-Foot Fin at a Glance

Blade
Co-injection PP+TPE
Bolso para os pés
Silicone líquido LSR
Faixa de tamanho
EU 28 to EU 47
Product life
3 para 5 anos
Variants
Full-foot / open-heel
Quantidade mínima de OEM
300 pares / cor
30+
Anos de fabricação de natação & equipamento de mergulho desde 1993
27,824eu²
Fábrica de Guangzhou com 4 linhas de produção dedicadas
65
Injection molding machines including co-injection units
48h
Despacho de aletas de estoque, amostras de 1 par
F-6866 full-foot snorkeling fins with co-injection molded blade and LSR foot pocket
F-6866full-foot · adult snorkeling
Snorkeling fin blade design detail showing thrust channels from the Vanguard factory
Snorkeling fin blade and foot pocket assembly detail

The F-6866 Full-Foot Fin, Built for Warm-Water Volume

The F-6866 is our highest-volume snorkeling fin platform. A co-injection molded blade bonds a stiff PP structural rib to a softer TPE outer skin in a single shot, eliminating the delamination failure that plagues two-piece glued blades. Paired with an LSR silicone foot pocket, it delivers 3 para 5 years of service in resort and rental conditions.

01

Co-Injection Molded Blade

One shot, two materials. The rigid PP rib carries the load through the kick stroke while the TPE skin flexes at the tip to channel water rearward. No adhesive layer to separate after 200 rental cycles. This is the construction difference your QC team will measure against cheaper glued-blade competitors.

02

LSR Silicone Foot Pocket

The foot pocket is molded from liquid silicone rubber (LSR): soft against bare skin, travado no calcanhar, with no pressure points during 45-minute snorkel sessions. Unlike TPR pockets that harden after UV exposure, LSR retains its elasticity season after season in tropical conditions.

03

Full Size Grading on One Platform

EU 28 through EU 47 on a single blade tooling set. Junior sizes share the same blade profile scaled down, so your resort program stocks one visual identity across kids and adults. Fewer molds, faster reorders, consistent branding on the rental rack.

04

Open-Heel Variant Available

The same blade and pocket platform also ships as an open-heel adjustable-strap fin (F-6865) for buyers who need one-size-fits-most simplicity or bootie compatibility. Two SKUs, one tooling investment, double the addressable market from a single program.

The F-6866 full-foot and F-6865 adjustable-strap share the same blade mold and LSR foot pocket tooling. Programs that stock both variants reorder from the same production schedule and consolidate shipping.

Four Snorkeling Fin Programs, One Factory Floor

Adjustable-strap for rental simplicity, compact short-blade for travel retail, full-foot for warm-water resorts, and junior sizing for family programs. All four share the same QC standard, a mesma plataforma LSR com bolso para os pés, e o mesmo MOQ de 300 pares por cor.

Compact short-blade snorkeling fins for travel, model F-6871
Compact travel

F-6871 Compact Short-Blade Fins

A shortened blade profile that fits carry-on luggage and resort rental bins. Optimized for surface swimming and pool training where a long blade creates drag and ankle strain. The top seller for airline holiday packages and hotel gift shops.

Short bladeTravel sizeQuantidade mínima 300 pares/cor
Quote compact fins
Full foot pocket snorkeling fins for warm water, model F-6851
Full foot

F-6851 Full-Foot Comfort Fins

A barefoot-fit full-foot pocket with a wider toe box for guests who refuse rental shoes. Lightweight enough for children and seniors, stiff enough for efficient surface swimming. The default choice for tropical resort operators stocking 200-plus pairs.

Full footBarefoot fitLeve
Quote full-foot fins
Kids short snorkeling fins OEM, model F-6881
Júnior / crianças

F-6881 Kids Short Snorkeling Fins

Scaled blade geometry and a softer LSR pocket sized EU 28 to EU 35. Reduced blade area matches a child’s ankle strength so they swim longer without fatigue. Pairs with our F-6868 juniors model for a full youth size run from age 5 para 14.

EU 28-35Soft flexIdade 5-14
Quote kids fins

Fin engineering

Blade Design, Foot Pocket Material, and Fit: The Three Specs That Decide Returns

Snorkeling fin buyers compare three things before they place a 500-pair order: how the blade moves water, what touches the customer’s skin, and whether the sizing runs true. Here is how our engineering answers each one.

01

Blade geometry controls thrust and fatigue

A snorkeling blade that is too stiff overloads the ankle within 10 minutos; one that is too soft produces no forward drive. We tune blade length, rib thickness, and tip flex so the power stroke loads water through the central channel and releases it cleanly at the tip. The result is a relaxed flutter kick that covers distance without calf burn, which is exactly what a 40-minute reef tour demands.

02

LSR silicone vs. TPE vs. rubber foot pockets

LSR (liquid silicone rubber) is the premium option: hypoallergenic, UV-stable, and soft at 40-50 Shore A. TPE pockets cost less but harden after one season of tropical sun. Natural rubber grips well but triggers latex sensitivity in roughly 8% of the population. For a resort that rents to 2,000 guests a month, LSR eliminates the complaint category entirely.

03

Adjustable strap vs. full-foot: stock the right mix

Full-foot fins (F-6866, F-6851) fit bare feet precisely and transfer power efficiently, ideal for warm-water resorts where guests wear no booties. Adjustable-strap fins (F-6865, F-6857) accept booties and cover a size range with one buckle setting, the right call for cooler water, scuba crossover, and rental operations that cannot size-fit every guest. Most programs stock 70% full-foot and 30% adjustable.

04

Size grading that runs true across reorders

Our CNC-trimmed molds hold dimensional tolerance within 0.5mm across the EU 28 to EU 47 range. Because the same tooling set produces every reorder, your size 42 fits identically in year one and year three. This consistency is why resort chains reorder from us rather than re-qualifying a new supplier each season.

Snorkeling fin blade design and thrust channel detail from Vanguard factory

Adjustable strap vs. full-foot comparison

FatorAdjustable strap (F-6865)Full-foot (F-6866)
Fit methodBuckle strap, covers 3 sizes per SKUPrecise barefoot fit, one size per SKU
Bootie useAccepts 3mm to 5mm bootiesBarefoot or thin neoprene socks only
Power transferGood, slight heel lift under hard kickDirect, no heel movement
Rental simplicityFewer SKUs, faster guest fittingMore sizes but better comfort rating
Water tempCool to warm (18C and up with booties)Warm water (24C and up)
Melhor canalDive centers, cooler-water tours, scuba crossoverTropical resorts, holiday packages, family retail

Not sure which mix fits your operation? Pergunte aos nossos engenheiros para uma recomendação com sua cotação. Most programs stock both.

Custom Snorkeling Fins From 300 Pares por cor

De 300 pares por cor, transformamos sua folha de especificações em barbatanas prontas para o varejo. Blade color, cor do bolso do pé, logo placement, size grading, e embalagens, tudo acontece dentro do nosso 27,824 eu² Instalação de Guangzhou, gerenciado por uma equipe de 123 pessoas com 15 R dedicado&Engenheiros D.

Custom Blade Color and Graphics

Pantone color matching for blade and foot pocket, logo printing or embossing, and custom blade graphics that make your fins recognizable on a rental rack or in a listing image.

Embalagem de marca própria

Sacos de barbatana de malha, caixas de varejo impressas, e caixas prontas para FBA com rotulagem rastreável em lote. Packed the way your channel requires, from resort shelf display to Amazon FNSKU compliance.

Size Grading and Fit Tuning

Full-foot and open-heel pockets graded EU 28 to EU 47 on our own tooling. We can adjust pocket volume for your target market, wider toe boxes for North American guests, narrower heels for European fit preferences.

Controle de qualidade rastreável em lote

Cada lote inspecionado sob nossa ISO 9001:2015 sistema, com inspeção pré-embarque pela SGS, Intertek, ou seu terceiro indicado providenciado mediante solicitação. CNC-trimmed molds hold 0.5mm tolerance across the size run.

Resumo dos termos comerciais

Quantidade mínima
300 pares por cor para nadadeiras personalizadas. Estoque de itens de 1 par, não menos importante.
Amostras
Amostras de estoque 2-7 dias. Custom samples with your colors and logo 7-15 dias.
Produção
First orders around 30 dias; reorders roughly 25 dias com moldes e receitas de cores em arquivo.
SKUs de estoque
Envio dentro 48 horas do nosso armazém em Guangzhou.
Pagamento
30% depósito na confirmação do pedido, 70% saldo antes do envio. Taxas de amostra creditadas em seu primeiro pedido de produção.
Conformidade
ISO 9001:2015, BSCI, CE documentation included. SGS and Intertek reports on request.

Desenvolvimento protegido por NDA

Moldes personalizados e arte da lâmina são trocados somente sob um NDA assinado, armazenado separadamente, e nunca foi compartilhado ou revendido para outro comprador. Sua marca própria permanece sua. Emparelhe barbatanas com máscaras e snorkels from the same factory for a consolidated snorkeling program.

What Snorkeling Fin Buyers Ask Us First

Ainda tenho dúvidas?

Envie seus modelos de destino, quantidades, and size breakdown. Nossa equipe de exportação responde com preços, Quantidade mínima, e prazo de entrega dentro de um dia útil.

What is the minimum order quantity for custom snorkeling fins?
Custom snorkeling fins start at 300 pares por cor, covering your blade color, cor do bolso do pé, logo placement, e embalagem. As barbatanas de estoque prontas para envio não têm valor mínimo e podem ser encomendadas em 1 par, which lets a resort shop or e-commerce seller validate a SKU before committing to a full production run.
Quanto tempo levam as amostras, e quanto custam?
Amostras de estoque enviadas em 2 para 7 dias. Custom samples with your Pantone colors, impressão de logotipo, and size spec take 7 para 15 days because our in-house prototyping line runs CNC-trimmed molds on demand. As taxas de amostra são creditadas em seu primeiro pedido de produção, e apoiamos a inspeção pré-embarque pela SGS, Intertek, ou seu terceiro indicado.
What blade materials do you use for snorkeling fins?
Our snorkeling fin blades are co-injection molded from PP+TPE polymer, which balances flex for efficient kicking with enough rigidity to transfer power through the thrust channel. The co-injection process bonds a stiff structural rib to a softer outer skin in one shot, eliminating the delamination failure common in two-piece glued blades. Foot pockets are molded from LSR liquid silicone rubber for skin-contact comfort.
Which certifications do your snorkeling fins carry for import?
As barbatanas são produzidas sob nossa ISO 9001:2015 quality system with BSCI social compliance audits, and products carry CE documentation for EU market entry. The LSR foot pocket material is skin-contact safe. Additional SGS or Intertek test reports can be arranged with batch-traceable references for retail onboarding in the US, EU, and Australia.
Qual prazo de entrega devo planejar para um primeiro pedido e novos pedidos?
First production orders complete in about 30 dias dependendo da quantidade e profundidade da personalização. Reorders finish in roughly 25 days because molds, color recipes, and size grading are already on file. Os SKUs de estoque saem do nosso armazém em Guangzhou dentro 48 horas. Os termos padrão são 30% depósito na confirmação e 70% saldo antes do envio.
Can you apply our logo and match custom colors?
Sim. Private label covers logo printing or embossing on the blade and foot pocket, Pantone color matching for both blade and pocket, custom blade graphics, e embalagens prontas para varejo, como sacos de malha, caixas impressas, ou caixas prontas para FBA. Tudo funciona internamente em nossa fábrica em Guangzhou sob um NDA assinado, e seus moldes e obras de arte nunca serão compartilhados com outro comprador.

Get a Snorkeling Fin Quote Within 24 Horas

Conte-nos seus modelos-alvo, quantidades, and size breakdown. Nossa equipe de exportação responde dentro de um dia útil com preços de fábrica, Quantidade mínima, color options, e prazo de entrega. As taxas de amostra são creditadas em seu primeiro pedido de produção.

vanguardswimming@hotmail.com  ·  +86-20-62323009

Voltar ao topo
Precisa de uma cotação rápida? Converse com nossa equipe de exportação no WhatsApp.